Wasatch Serial Keygen. Rack Stop: It is a factory set adjustment that determines how close the objective lens can get to the slide. This prevents the viewer from cranking the high power objective lens into the slide. It is used only when really thin slides are used to focus a sample under high power. Coarse and Fine Focus: These are the knobs that help focus the microscope. There are many compound microscopes that have coaxial knobs.

The coaxial knobs are built on the same axis as the fine focus knob on the outside. This proves to be more convenient to use as you do not need to fumble with different knobs.

Stage: The stage is the flat surface on which you keep the specimen to be observed. Microscopes with mechanical stage have two knobs. Amv Video Codec Keygen Music. These knobs can be used to move the slide around, that is, left and right or up and down. Stage Clips: The stage clips are used to hold the slide in place on the stage.

An organized list of the most common microscope parts. Learn about the important parts of microscope and its function to the scientist.

Aperture: The tiny hole in the stage that helps in transmitting base light to the stage. Illuminator/Mirror: The light source that is located at the base of the microscope. The mirror reflects the light from the outside source through the bottom of the stage.

This helps in illuminating the sample on the slide. Many light microscopes use low voltage halogen bulbs.

They have a continuous variable light control part at the base that helps in focusing in different light range. Condenser: The condenser is present at the base of the stage. It is usually connected to the iris diaphragm. Iris Diaphragm: This part helps in controlling the amount of light that reaches the specimen. The diaphragm is located above the condenser and below the stage.

Condenser Focus Knob: In order to help the condenser move up and down and control the lighting focus on the specimen, a condenser focus knob is used.